Mercedes G-Class W463 front Wheel Bearing Master kit

This is our front axle master bearing and CV joint kit and it's contains all parts you will need to do this job properly:

• Two bearings INNER.

• Two Bearings OUTER

• Two seals INNER

• Two seals OUTER

• Two felt seals

• Two king pin bearings UPPER

• Two king pin bearings  LOWER

• Four king pin bearing caps UPPER

• Four king pin bearing caps LOWER

• Two paper gaskets

• Two ball gaskets

• Two locking washers

• Two C/V Joints

• Four axle nuts

• two axle seals

• C/V Boot Kit

• Mercedes axle bearing grease (4)

• Two axle shaft seals

• Two axle shaft bushings.

• Installation manual.

  Please, click on a picture to enlarge image of all parts.

       Be advise, that we do not use any "generic" pictures, all our pictures represent actual items, you will get exactly what you see.

This kit will fits all Mercedes G-Class W463 cars from 2002 to 2018 (G500, G400CDI, G270CDI, G55AMG, G550))

         This kit is NOT for G-Class vehicles from 1990 to 2000.

  Important! Wheel bearing sets are safety parts! An incorrectly assembled wheel

  bearing set may cause bad accidents!

  The mounting instruction of the manufacturer must be observed!